Accessories
-
Cooler Master LGA1700 Bracket for Hyper 212 EVO V2/MA612 Stealth
The Cooler Master LGA1700 Bracket for Hyper 212 EVO V2/MA612 Stealth features an Intel® LGA1700 mounting bracket to suit the Hyper 212 EVO V2 and MasterAir MA612 Stealth Series CPU coolers.…
$2
$2
In stock -
Corsair ELITE Series Intel Retention Kit
The Corsair Elite Series Intel Retention Kit is a hardware kit that includes the brackets, standoffs, and thumbnuts needed to mount an RGB ELITE Capellix, or LCD Series AIO cooler to Intel 1700, 1200, 1150, 1151, 1155, 1156, 1366, 2011, and 2066 sockets.…
$25
$25
In stock -
Corsair Hydro X Series XT Hardline 12mm Multi-Card Kit
The Hydro X XT multi-card kit is a pre-cut for SLI, and CrossFireX allowing users to easily mount cards together in two or three-slot graphics card spacing. Neatly link your GPU water blocks together via crystal-clear chamfered tubing.…
$15
$15
In stock -
Corsair Hydro X Series XT Pressure Leak Tester Tool Kit
The Corsair Hydro X Series XT Pressure Leak Tester Tool Kit is a simple pressure tester kit that easily tests your custom cooling loop for potential leaks. Use it prior to filling your loop with coolant, to detect even the smallest leaks using air pressure.…
$75
$75
In stock -
Corsair iCUE Link 4-Way Signal Splitter
The Corsair iCUE Link 4-Way splitter allows users to expand their iCUE Link setup's configuration options and contains four iCUE Link device ports for more flexibility in your setup. Simply plug directly into a single port on the iCUE System Hub (sold separately) with t…
$29
$29
In stock -
Corsair iCUE Link Cable 100mm 2 Pack
The Corsair iCUE LINK 100mm cable 2 pack features 2 x 100mm straight cables, giving you the flexibility to manage and route your connections more efficiently.…
$32
$32
In stock -
Corsair iCUE Link Cable 200mm 2 Pack
The Corsair iCUE LINK 200mm cable 2 pack features 2 x 200mm straight cables, giving you the flexibility to manage and route your connections more efficiently.…
$32
$32
In stock -
Corsair iCUE Link Cable 600mm
The Corsair iCUE LINK 600mm cable features one 600mm straight cable, giving you the flexibility to manage and route your connections more efficiently.…
$32
$32
In stock -
Corsair iCUE Link Cable 90-Degree 200mm 2 Pack
The Corsair iCUE LINK 200mm cable 2 pack features 2 x 200mm 90-degree cables, giving you the flexibility to manage and route your connections more efficiently.…
$32
$32
In stock -
Corsair iCUE Link Cable 90-Degree 600mm
The Corsair iCUE Link Cable 90-Degree 600mm gives you the flexibility to manage and route your connections more efficiently.…
$32
$32
In stock -
Corsair iCUE Link Cable Kit 5 Pack
The Corsair iCUE LINK cable kit features five cables, giving you the flexibility to manage and route your connections more efficiently. This kit features 1 x 600mm cable, 2 x 200mm cables, and 2 x 100mm cables.…
$79
$79
In stock -
Corsair iCUE Link Cable Y-Splitter 600mm
The Corsair iCUE Link Y-Splitter cable is a 600mm cable that enables seamless iCUE Link connections and offers even more connection options for your iCUE Link setup.…
$32
ETA: 09/08/24 This item is expected to arrive into our warehouse around 09/08/24$32
ETA: 09/08/24 -
Corsair iCUE LINK GPU RGB Adapter
Seamlessly connect new devices to your existing iCUE Link Setup with the Corsair iCUE LINK GPU RGB Adapter, by removing the need for extra cables and controllers, this adapter converts the 3-pin RGB header into a standard iCUE LINK connector. *Only compatible with CO…
$35
$35
In stock -
Corsair iCUE LINK LCD Screen Module Black
Upgrade your iCUE LINK RGB CPU Cooler with a custom 2.1” IPS LCD screen. The Corsair iCUE LINK LCD Screen Module is a fully customisable dynamic backlit display tracking real-time CPU temperatures at 30 FPS, with easy tool-free installation using snap and latch design…
$149
$149
In stock -
Corsair iCUE LINK LCD Screen Module White
Upgrade your iCUE LINK RGB CPU Cooler with a custom 2.1” IPS LCD screen. The Corsair iCUE LINK LCD Screen Module is a fully customisable dynamic backlit display tracking real-time CPU temperatures at 30 FPS, with easy tool-free installation using snap and latch design…
$169
ETA: 09/07/24 This item is expected to arrive into our warehouse around 09/07/24$169
ETA: 09/07/24 -
Corsair iCUE LINK Replacement Connector Kit
The iCUE Link Connector Kit contains five active and five passive replacement connectors for use with iCUE LINK products.…
$25
$25
In stock -
EK DRGB 6-Way Splitter Cable
The EK DRGB 6-Way Splitter Cable allows users to connect up to six digitally addressable RGB products to a single D-RGB (addressable) motherboard or controller header so that they can synchronize all their D-RGB products.…
$15
$15
In stock -
EK Loop Angled Bracket 120mm
The EK Loop Angled Bracket 120mm is a steel mounting bracket that enables the user to mount the FLT style combo units or reservoirs perpendicular to any 120mm (105mm hole spacing) fan mounting holes. This will allow more airflow to freely pass through the case, or just…
$45
$45
In stock -
EK Loop Cable Management System Hook and Loop Strips
The EK Loop Cable Management Hook and Loop Strips features six touch fasteners and a self-adhesive fabric. These touch fasteners allow you to securely connect RGB (and D-RGB) connectors without any worry about them coming apart later, which is pretty usual during the tr…
$11
$11
In stock -
EK Loop Connect Temperature Plug Sensor
The EK Loop Connect Temperature Plug Sensor is an NTC (negative temperature coefficient) coolant temperature sensor. It allows users to get a precise coolant temperature measurement and to fine-tune the radiator fan speed for an optimal balance between acoustics and per…
$14
$14
In stock -
EK Loop Connect USB External Cable 1m
The EK Loop Connect USB External Cable 1m will allow the user to connect their EK-Loop Connect controller unit to the PC via a standard USB connector that can be found on the back of the motherboard. This type of connection is beneficial to modders because it allows the…
$9
$9
In stock -
EK Loop DRGB Extension Cable 510mm
The EK Loop DRGB Extension Cable 510mm allows users to extend one D-RGB source so that they can build an aesthetically beautiful lighting system. It features standard 3-pin addressable RGB headers and the male-male connector pins are also included in the packaging.…
$11
Check back later! -
EK Loop Hacksaw 15cm Black
The EK Loop Hacksaw is a convenient hacksaw tool for sawing off hard tubes made of arcylic or PETG. Its fine-toothed blade provides efficient sawing without causing to splinter. It features non-slip ABS thermoplastic rubber coated handle, 150mm 65Mn Steel blade and plen…
$29
$29
In stock -
EK Loop Metal Tube Cutting Tool
The EK-Loop Metal Tube Cutting Tool is a small handy tool specifically made for metal tube cutting. It is compatible with various metal tubing made of copper, brass, and nickel. The maximum size compatibility of the cutter is 32mm of outer diameter (OD).…
$35
$35
In stock -
EK Loop Modulus Hard Tube Bending Tool 12mm
The EK-Loop Modulus 12mm hard tube bending tool is EK's approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 12mm diameter. These tools act as a mold, which helps the user to form the tubing in the desired shape. These tools are ma…
$55
$55
In stock -
EK Loop Modulus Hard Tube Bending Tool 16mm
The 16mm EK-Loop Modulus Hard Tube Bending Tool is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 16mm OD. These tools act as a mold, which helps the user to form tubing into the desired shape. These tools are made to…
$55
$55
In stock -
EK Loop Uni Pump Reservoir Bracket 120mm
The EK Loop Uni Pump Reservoir Bracket 120mm is a mounting adapter for installation of EK D5, DDC, SPC, and VTX pumps and pump-reservoir combo units to any 120mm fan mounting hole pattern (105mm hole spacing). Additionally, it can be used with EK-RES X3 Holder 60mm (2pc…
$19
$19
In stock -
EK Loop Uni Pump Reservoir Bracket 140mm
The EK Loop Uni Pump Reservoir Bracket 140mm is a mounting adapter for installation of EK D5, DDC, SPC, and VTX pumps and pump-reservoir combo units to any 140mm fan mounting hole pattern (125mm hole spacing). Additionally, it can be used with EK-RES X3 Holder 60mm (2pc…
$16
$16
In stock -
EK Loop Vertical GPU Holder EVO Gen4 Riser
The EK-Loop Vertical GPU Holder EVO - Gen4 Riser is a steel mounting bracket with a PCIe 4.0 riser cable that enables the user to mount the GPU vertically and show it off. Displaying your water-cooled graphics card or, alternatively, a GPU with a standard massive air co…
$229
$229
In stock -
EK O-ring Terminal 15x1mm
Replacement O-ring for EK-FC Terminals. Bare O-ring only. Comes without screws or gaskets.…
$0.5
$0.5
In stock -
EK Pro Clamp 10/17 100 Pack
The EK Pro Clamp 10/17 100 Pack is a set of one hundred tube clamps that are used in conjunction with barb fittings and soft tubing of outer diameter (OD) between 15 and 17mm.…
$115
$115
In stock -
EK Pro Clamp 10/17 20 Pack
The EK Pro Clamp 10/17 20 Pack is a set of twenty tube clamps that are used in conjunction with barb fittings and soft tubing of outer diameter (OD) between 15 and 17mm.…
$32
$32
In stock -
EK Pro Clamp 6/12 100 Pack
The EK Pro Clamp 6/12 100 Pack is a set of one hundred tube clamps that are used in conjunction with barb fittings and soft tubing of outer diameter (OD) between 10 and 12mm.…
$95
$95
In stock -
EK Pro Clamp 6/12 20 Pack
The EK Pro Clamp 6/12 20 Pack is a set of twenty tube clamps that are used in conjunction with barb fittings and soft tubing of outer diameter (OD) between 10 and 12mm.…
$22
$22
In stock -
EK Pro CPU Quick Disconnect Kit
The EK Pro CPU Quick Disconnect Kit is the most efficient way to transform your CPU water block into a quick-disconnect ready assembly, enabling easy assembly and disassembly of the liquid cooling loop without the need of draining the entire setup. The kit includes a 1m…
$215
Check back later!$215
Check back later! -
EK Pro GPU Quick Disconnect Kit
The EK Pro GPU Quick Disconnect Kit is the most efficient way to transform your liquid-cooled GPU into a quick-disconnect ready water block assembly, enabling easy assembly and disassembly of the liquid cooling loop without the need of draining the entire setup. The kit…
$185
$185
In stock -
EK Quantum Convection D5 Cover Black
EK-Quantum Convection D5 Cover Black is a premium aesthetical cover for D5 pumps. It is made of CNC-machined aluminium that is anodized in black. It is designed to improve the aesthetics of D5 pumps and features a rectangular design with a convenient hole for routing th…
$75
$75
In stock -
EK Quantum Flow Indicator D-RGB Black
The EK Quantum Flow Indicator D-RGB Black is a premium flow indicator with addressable RGB. It features 3 x female G/14" ports, can be mounted mid tube run with two fittings or fastened to any G1/4" port on a radiator, pump, or even a block via the use of a dual male-th…
$69
$69
In stock -
EK Quantum Flow Indicator DRGB Nickel
The EK Quantum Flow Indicator DRGB Nickel is a premium flow indicator with addressable RGB implementation belonging to the Quantum Line. It visually represents the coolant flow rate, which is often hard to see with the naked eye. This can be very useful to instantly see…
$79
$79
In stock -
EK Quantum Kinetic FLT 360 Accent Silver
The EK Quantum Kinetic FLT 360 Accent Silver is an interchangeable silver aluminium cover that effortlessly replaces the black cover on Quantum Kinetic FLT 360 combo units and EK-Quantum Volume FLT 360 reservoirs.…
$65
$65
In stock -
EK Quantum Kinetic FLT 80 Accent Silver
The EK Quantum Kinetic FLT 80 Accent Silver is an interchangeable silver aluminium cover that effortlessly replaces the black cover on Quantum Kinetic FLT 80 combo units and EK-Quantum Volume FLT 80 reservoirs.…
$39
$39
In stock -
EK Quantum Magnitude AM5 UNC Standoffs Nickel
The EK Quantum Magnitude UNC Standoffs - AM5 is a UNC 6-32 standoff pack that enables the use of EK-Quantum Magnitude AMD water blocks on AM5-socket motherboards.…
$6
$6
In stock -
EK Quantum Scalar 2 DirectLink Side Port Terminal Acetal
On sale! (normally $85) EK-Quantum Scalar 2 DirectLink Side Port Terminal Acetal is a specialized Scalar 2 terminal for EK-Quantum Vector 2 GPU ABP sets from the premium Quantum Line. Its primary use is in the case of vertical mounting a GPU that is sandwiched in the EK…
$65
$65
In stock -
EK Quantum Scalar 2 SFF Terminal Acetal
On sale! (normally $99) EK-Quantum Scalar 2 SFF Terminal Acetal is a specialized Scalar² terminal for EK-Quantum Vector2 GPU water blocks from the premium Quantum Line. It was engineered with the benefits of SFF-builders in mind. It is 14mm thinner than the stock termi…
$79
$79
In stock -
EK Quantum Scalar Flow Indicator Bottom-To-Top DRGB Black
EK-Quantum Scalar Flow Indicator is a premium GPU-mounted flow indicator with addressable D-RGB implementation. It visually represents the coolant flow rate, which is often hard to see with the naked eye. This can be very useful to instantly see if your loop operation i…
$105
$105
In stock -
EK Quantum Vector 2 Terminal O-Ring 14x1mm Twin Pack
The EKWB Quantum Vector2 Terminal O-Ring twin pack is a set of two replacement O-rings for the EK-Quantum Vector2 GPU block terminals.…
$2.5
$2.5
In stock -
EK Quantum Velocity 2 1200/1700/AM4 UNC Mounting Screws Nickel
The EK Quantum Velocity 2 AMD5 UNC pack is a UNC 6-32 mounting screw pack of 4 x screws that enables the use of EK Quantum Velocity 2 AMD and Momentum 2 AMD water blocks on AM5-socket motherboards.…
$6
$6
In stock -
EK Quantum Velocity 2 AM5 UNC Mounting Screws Nickel
The EK Quantum Velocity 2 AM5 UNC pack is a UNC 6-32 mounting screw pack of 4 x screws that enables the use of EK Quantum Velocity 2 AMD and Momentum 2 AMD water blocks on AM5-socket motherboards.…
$6
$6
In stock -
EK Quantum Velocity IHS Removal Tool 1700
The EK-Quantum Velocity2 IHS Removal Tool - 1700 is a delidding or IHS removal tool. It allows users to remove the Integrated Heat Spreader (IHS) from their CPUs and directly cool the CPU die. It is a safe, easy, quick, and ultimately practical way of removing the IHS…
$129
$129
In stock -
EK Quantum Velocity Ryzen Edition AM5 UNC Standoffs Black
The EK Quantum Velocity Ryzen Edition UNC Standoffs is a UNC 6-32 standoff pack that enables the use of EK-Quantum Velocity D-RGB - AMD Ryzen Edition water block on AM5-socket motherboards. Note: This standoff set is not for regular Velocity water blocks, it is exclus…
$6
$6
In stock -
EK RES X3 Multiport Top
The EK-RES X3 Multiport TOP is an alternative top end cap for EK-RES X3 series reservoir which offers additional port configurations. This TOP allows installation of three tubes. These tubes, which are sealed with quality NBR rubber gaskets, allow the ports on this T…
$29
$29
In stock -
EK RES X3 Reservoir End Cap Top Black
The EK RES X3 Reservoir End Cap Top Black is the stock black top end cap specifically designed for EK RES X3 series reservoirs and other RES X3 based parts. It is made from quality machined black POM acetal material.…
$11
$11
In stock -
EK Revo D5 Pump Mount
The EK Revo D5 Pump Mount is designed to be used with D5 pumps and existing XTOP D5 products from the Revo lineup (sold separately), and features an improved soft rubber shock absorber with enhanced vibration reducing pattern.…
$19
$19
In stock -
EK Waterblocks HD Tube Reamer
The EK-HD Tube Reamer is an external and internal tube reamer. The tool is used to remove the remains of freshly cut Acrylic, PETG, copper, aluminium, brass, carbon fibre tubing. Suitable for tubes with a minimum inner diameter of 5mm and maximum outer diameter of 30mm.…
$19
$19
In stock -
EK-ATX Bridging Plug 24 pin
The EK-ATX Bridging Plug 24 pin is ideal for use with 12v Water Pumps to power up without mainboard power.…
$5
Check back later! -
EK-UNI Pump Bracket Vertical for 140mm Fan
The EK-UNI Pump Bracket (140mm FAN) Vertical is a mounting adapter for the installation of Xylem D5 powered EK-XTOP Revo D5 and EK-XRES Revo D5 units to any 140mm fan hole pattern application. It can be used for vertical or horizontal positions.…
$29
$29
In stock -
EK-UNI Vertical 120mm Pump Bracket
The EK Water Pump Mount fits to both 120mm vertical and horizontal fans, to neatly attach various water pumps for your liquid cooling setup. Made from press-bent 1.5mm thick painted steel, the holder is compatible with EK's range of water cooling pumps and comes with pr…
$25
Check back later! -
EKWB FC Pro Terminal Angled 45
The EKWB FC Pro Terminal Angled 45 is a replacement GPU water block terminal. It is compatible with the server rack line of EK-Pro GPU water blocks and features two G1/4” threaded ports with a 45° angle for added compatibility in tight server enclosures.…
$85
$85
In stock -
EKWB Loop Angled Bracket 120/140mm
The EK Loop Angled Bracket 120/140mm is a steel mounting bracket that enables the user to mount the FLT style combo units or reservoirs, radiators, and fans with 140mm (125mm hole spacing) fan mounting holes perpendicular to any 120mm (105mm hole spacing) fan mounting h…
$55
$55
In stock -
EKWB Loop Angled Bracket 140/120mm
The EK Loop Angled Bracket 140/120mm is a steel mounting bracket that enables the user to mount the FLT style combo units or reservoirs, radiators, and fans with 120mm (105mm hole spacing) fan mounting holes perpendicular to any 140mm (125mm hole spacing) fan mounting h…
$55
$55
In stock -
EKWB Loop Angled Bracket 140/140mm
The EK Loop Angled Bracket 140/140mm is a steel mounting bracket that enables the user to mount the FLT-style combo units or reservoirs, radiators, and fans perpendicular to any 140mm (125mm hole spacing) fan mounting holes. This will allow more airflow to freely pass t…
$55
$55
In stock -
EKWB Loop DRGB 3-Way Splitter Cable
The EKWB Loop DRGB 3-Way Splitter Cable allows you to connect up to 3 digitally addressable RGB products to a single DRGB header, for synchronised lighting control. Featuring standard 3pin D-RGB headers and suitable for use with standard 3-pin 5V D-RGB headers on compat…
$14
$14
In stock -
EKWB Loop Leak Tester Flex
The EKWB Loop Leak Tester Flex is a fast and safe way of testing for possible leaks in your liquid cooling loop. While traditional leak testing works, it requires hours before very small leaks are detected and then things can become messy. The EK-Loop Leak Tester Flex d…
$59
$59
In stock -
EKWB Quantum Kinetic FLT 120 Accent Silver
The EKWB Quantum Kinetic FLT Accent is an aluminium cover to replace the black cover on Quantum Kinetic FLT combo units and Quantum Volume FLT reservoirs. In a Silver colour and compatible with 120mm models.…
$39
$39
In stock -
EKWB Quantum Kinetic FLT 240 Accent Silver
The EKWB Quantum Kinetic FLT Accent is an aluminium cover to replace the black cover on Quantum Kinetic FLT combo units and Quantum Volume FLT reservoirs. In a Silver colour and compatible with 240mm models.…
$55
$55
In stock -
Lian Li Radiator Offset Mounting Bracket
The Lian Li Radiator Offset Mounting Bracket provides more configurations for your build and includes 6 x brackets for 360mm, 240mm and 120mm radiators to further customise your setup.…
$15
$15
In stock -
Noctua NM-AM5-4-MP83 Cooler Mounting Kit
The Noctua NM-AM5-4-MP83 Cooler Mounting Kit is a SecuFirm2 mounting upgrade kit that allows Noctua CPU coolers with 83mm mounting pitch to be upgraded to AMD’s AM5 and AM4 platforms. This kit combines reliability, optimal contact pressure and straightforward installa…
$19
$19
In stock -
Thermal Grizzly AM5 Adapter and Offset Mounting Kit
The Thermal Grizzly AM5 adapter and offset kit is a mounting kit for AMD socket AM5 motherboards and includes cooler brackets for offset mounting of the CPU, as well as adapter screws from UNC 6-32 and M4 threads.…
$45
$45
In stock -
Thermaltake Pacific 4-Way G1/4 Connector Block Chrome
The Thermaltake Pacific 4-Way G1/4 Connector Block is finished in chrome-plated copper, and allows users to redirect fittings for easier tube routing. Thermaltake fittings provide a complete solution for DIY enthusiasts and PC builders by giving users ideal mounting, fi…
$10
$10
In stock -
Thermaltake Pacific A2 Ultra Memory Water Block
The Thermaltake Pacific A2 Ultra memory water block is equipped with a 3.9” LCD display for monitoring real-time temperature and your PC performance, meanwhile allowing you to add flair to your liquid cooling system. Note: The Thermaltake Pacific A2 Ultra Memory…
$249
$249
In stock -
Thermaltake Pacific Flow Indicator One
The Thermaltake Pacific Flow Indicator One with its five fan blade design provides a great way to check the flow of the system. Featuring exceptional performance and unrivalled reliability, the Pacific Flow Indicator One is compatible with any standard G1/4 fitting on e…
$45
$45
In stock -
Thermaltake Pacific Leak Tester
The Thermaltake Pacific Leak Tester is a simple and easy to use tool that allows users to test out their liquid cooling water loops before filling them, all with a few pumps.…
$55
$55
In stock -
Thermaltake Pacific TF2 Temperature and Flow Indicator
The Thermaltake Pacific TF2 Temperature and Flow Indicator is a 2-in-1 design, the indicator detects coolant temperatures ranging from 0°C to 99°C and displays the value in Celsius or Fahrenheit. The indicator features temperature and low-flow warning alerts, is compa…
$79
$79
In stock -
Thermaltake Pacific TF3 Liquid Cooling System Dashboard
The Thermaltake Pacific TF3 Liquid Cooling System Dashboard has 3 analog dashboards that allow you to check your system’s real-time Coolant Temperature, Coolant Pressure, and even Chassis’ Ambient Temperature. It can be installed anywhere inside the chassis because…
$169
$169
Stock at Supplier -
DEMCiflex Triple 120mm Magnetic Fan Filter
DEMCiflex computer air filters are designed to help keep your PC dust-free. The simple one-piece construction and magnetic adhesion of the DEMCiflex fan filter allows easy removal and cleaning of the re-usable, plastic filter. Overview: Size: 3x120mm Colour: Bl…
$25
ETA: 19/07/24 This item is expected to arrive into our warehouse around 19/07/24$25
ETA: 19/07/24 -
DEMCiflex Triple 140mm Magnetic Fan Filter
DEMCiflex computer air filters are designed to help keep your PC dust-free. The simple one-piece construction and magnetic adhesion of the DEMCiflex fan filter allows easy removal and cleaning of the re-usable, plastic filter. Overview: Overall Size: 170mm x 470mm…
$29
$29
In stock -
NZXT Vertical GPU Mounting Kit for H5 H7 H9 White
The NZXT Vertical GPU Mounting Kit enables users with H5, H7 or H9 cases to show off the graphics card by positioning it vertically, letting one get a full view of the premiere component in the system. A 175mm PCI-E 4.0x16 riser cable is included, is backwards compatibl…
$139
$139
In stock -
Thermaltake Pacific Hard Tube Bending Kit
The new hard tube bending tools offered by Thermaltake are especially designed for ID 1/2in (12mm) x OD 5/8in (16mm) hard tubing and provide everything makers needed when considering loop planning. Available in various angles, the laser-marked mandrels are made from sol…
$125
$125
In stock -
Thermaltake Pacific Hard Tube Bending Kit for ID 10mm x OD 12mm
The new hard tube bending tools offered by Thermaltake are especially designed for ID 10mm x OD 12mm hard tubes and provide everything makers need when considering loop planning. Available in various angles, the laser-marked mandrels are made from solid aluminium and ar…
$125
$125
In stock