Arctic Freezer 36 A-RGB CPU Cooler White

With the Arctic Freezer 36 A-RGB CPU Cooler's push pull configuration, design and performance are at your fingertips, featuring 2x P12 high static pressure PWM PST A-RGB fans with high quality fluid dynamic bearings, optimised heatsink for greater ventilation efficiency, pre-applied MX-6 thermal paste and is compatible with Intel® and AMD® sockets.

Features

---

Freezer 36 A-RGB (White)

Multi Compatible Tower CPU Cooler with A-RGB.

High-Class Finish with Aluminium Top Plate

With its push-pull configuration, the Freezer 36 A-RGB not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.

Performance-Optimised Successor

Internal tests have shown that the Freezer 36 not only offers significant improvements compared to its predecessor models, the Freezer 35 and the still popular Freezer 34 eSports DUO, but also against competitor coolers. The simplified assembly and increased performance make it suitable for beginners as well as an upgrade option. The tests were conducted in Arctic's HK lab; all coolers ran at full speed.

Future-Proof Compatibility

The Freezer 36 A-RGB is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. Arctic customers don't need to worry that the new CPUs will also require new coolers. Arctic guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.

• AMD® - AM5 | AM4
• Intel® - LGA1851 | LGA1700

Improved Fan Mounting

Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 A-RGB is therefore compatible with most 120 mm fans.

LGA1851 | LGA1700 Contact Frame

Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.

High-Quality Bearing

Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.

Optimised Heatsink

The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.

P-Fans - High Static Pressure and Impressive Colours

ARCTIC relies on the proven P-fans with A-RGB illumination. The P-series, which is known for its powerful performance, is particularly suitable for use on heat sinks and radiators. The 12 built-in LEDs can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fans can therefore be fully illuminated directly via the A-RGB mainboard connection and synchronised with the lighting of other hardware.

Large Selection of Variants

The Freezer 36 is available in five different versions, all equipped with two fans in a push-pull configuration. In addition to the standard model with aluminium heatsink design, a version with a black heatsink is also available. For continuous operation, there is also the CO version, which is equipped with fans with double ball bearings. Alternatively, users can choose between a black and a white version with A-RGB fans.