The Hotway H82-SU3S2 8-bay USB 3.0 Enclosure is an 8 bay non RAID enclosure capable of supporting up to 10TB per drive bay (64TB total capacity limit). With advanced features such as synchronised HDD sleeping mode, 2x 80mm smart fans with thermal sensors, the H82-SU3S2 is a cost effective solution for any SOHO or advanced home networking storage.
Features
8-Bay Enclosure
HDD sleep mode is synchronized with the PC’s power
Support HDD hot-swap
Internal power supply
Powers off in synchronization with PC
Fan easy to install & dismantle by users
10 Times Faster
The full-duplex data transfers capability allows the sending and receiving of data (at the same time) at 10 times faster than an equivalent card of USB 2.0 Standard. The maximum speed of USB 3.0 is 5Gbps, which enables the data transfer up to 25GB within a minute.
One Button Interface Selection
Flexible and alternative interface selection simply by pressing the button.
Power Sync
Powers off in synchronizatin with PC.
HDD X 8 (Supported)
All 8 HDDs are recognized when they are installed.
Smart Fan
Comes with auto / manual modes & 3 levels of speed for best convention.
Smart Fan functions:
- Thermal-sensor built-in
- Auto & manual modes
- 3 levels of speed
Fan Easy to Install & Dismantle
You can change the fan with another identical fan.
Specifications
| Descriptions |
8 – BAY 3.5″ Enclosure |
| Interface |
USB 3.0
e-SATA |
| Data Transfer Rate |
USB 3.0 up to 5.0 Gbps
e-SATA up to 6.0Gbps |
| Maximum HDD size |
10 TB (64TB total capacity limit)
Native 4KN Hard Drive Not Supported. |
| Multi-funtion LED displays |
Power
3 levels of fan speed
Manual / auto fan control
Synchronization
USB / e-SATA link
USB / e-SATA in use |
| Fan Function |
Smart fan function (FAN: 80mm x 80mm) X2 |
| HDD |
3.5″ SATA I / II / III HDD *SATA III at 3.0 Gbps SATA II speed.
Supports 8 HDDs of different brand & capacity |
| Operation Environment |
Temperature 0~60 ℃
Humidity 90% RH |
| System Requirements |
Windows 7 / Windows 8.1 / Windows 10
(with GPT enabled, supports total capacity more than 2TB)
Mac OS X 10.8 or later |
| Power adapter |
AC input: 100~240V
DC output: +12V/12A 5V/3A |
| Color |
black |
| Accessories Included |
e-SATA cable X1
USB 3.0 cable X1
Power cord X1
HDD Handle X8
Screw driver X1
QIGX1 |
| Unit Dimension |
253(D) x 155(W) x 352(H) mm |
| Unit Wt |
5kg |
Backed by a 1-year Hotway warranty.
