Go beyond RGB with Digital-RGB from Phanteks. With Digital-RGB each LED is controlled individually (addressable), featuring more patterns and colour modes. With Phantek’s D-RGB starter kit, you’ll have everything you need to get started with Digital RGB lighting. The starter kit comes included with the D-RGB controller hub, a remote and 2x D-RGB LED strips to light up your PC enclosure right away. Take immediate control of your lighting using the remote and choose from the best selection of custom colour mode or sync the controller hub with a compatible motherboard and take control through the motherboard’s software.
Features
Digital RGB LED Starter Kit
Digital RGB Controller / Hub
Manual Control
Customise your lighting with Phantek's D-RGB controller Preprogrammed with the best selection of colour modes and patterns Easy control with a simple 3-button remote Works right away, without the installation of additional third party software
Motherboard Control (Through Software)
Sync your Digital RGB controller to your (addressable) motherboard with the included D-RGB Motherboard adapter. Expand the motherboard supported power output from 3 to 9 Phanteks Digital RGB products.
Place it Anywhere
Easy installation with integrated magnets for a flexible placement inside your PC enclosure to get the best cable management result. Place the remote anywhere within reach with the included velcro tape.
High Density D-RGB LED Strips
Comes with 2x included 40CM D-RGB LED strips Each equipped with 30x LED's to spread light bright and evenly with smooth colour transitions. Powerful integrated magnets + 3m adhesives Daisy-chain connectors for more D-RGB connections Waterproof silicone housing
More D-RGB
Compatible with any Phanteks D-RGB products such as the Halos (Lux) Digital and D-RGB LED strips. Daisy chain up to 7x (using remote) or 9x (connected to motherboard) Phanteks' D-RGB products.
Halos Lux Digital
D-RGB LED Combo
Specifications
General Data
| Model Number |
PH-DRGB_SKT |
| Colour |
Black |
| Warranty |
2 Years |
D-RGB Controller Hub
| Application |
For Phanteks Digital RGB products
M/B with ASUS/MSI with D-RGB (+5V, Data, N/A, GND) |
| Colour Effects |
Full RGB Colour Spectrum
Custom Preset modes (3-button Remote)
Motherboard S/W support |
| Connections |
Input- Phanteks 3-pin (female) Connector
For Phanteks Digital Solution (Case, LED Strips, Halos Digital Series)
M/B Adapter (Digital RGB Adapter Pin Header) |
| Electricity Specification |
Digital RGB 5V |
| External Power |
Phanteks Controller Hub- 7A (does not include M/B current) |
| Controller Specification |
Output Current- 7A
Power Usage- 35W |
| Single Channel (A) |
4A |
| Single Channel (W) |
20W |
| Support Compatibility |
Halos Digital RGB (6pcs in total)
Digital RGB Strip (6M in total) |
| MTBF |
20,000hrs |
| I/0 |
Function Button- (Colour/Mode/Speed)
Output Connector- 3 Output
SATA Power- 1 input |
| Product Dimensions |
Control Board: 65 x 27 x 12mm / 2.56 x 0.6 x 0.47 in
Remote: 42 x 20 x 8mm / 1.63 x 0.79 x 0.32in |
D-RGB LED Strips
| Application |
ASUS/MSI Motherboard with Digital RGB Pin header Phanteks Digital RGB Controller |
| Colour Effects |
Full RGB Colour Spectrum with ASUS/MSI M/B control S/W |
| Connections |
Input: Phanteks 3pin Connector (Female) |
| Input Voltage |
+5V |
| Current (Single/Dual) |
MAX- 0.72A/1.44A |
| Wattage (Single/Dual) |
MAX- 3.6W/7.2W |
| Cable Compatibility |
For M/B with Digital RGB Pin header (+5V, DATA, NA, GND) |
| Magnet Number |
6pcs/strip |
| MTBF |
20,000hrs |
| No. of LEDs per strip |
30 LEDs |
| LED Colour/Controller |
KS6812, Full Colour Digital RGB LED chip |
| Product Dimensions |
450 x 10.5 × 4.5mm / 17.7 x 0.4 x 0.17in |
Backed by a 2 year Phanteks warranty.
