The Phanteks M25 120mm PWM Fan Digital RGB White are optimised to perform the best with fine mesh/dust filters, heatsinks and radiators with reduced RPM levels. It features excellent low noise performance thanks to a high airflow/RPM ratio that minimises bearing and motor noises, precise RPM control through PWM with a RPM range of 400 - 2000RPM, can be daisy-chained for clean cable management and 12 D-RGB LEDs. Comes in a pack of 3.
Features
Overview
- Optimized to perform the best with fine mesh/dust filters, heatsinks and radiators with reduced RPM levels
- Precise RPM control through PWM with a wide RPM range from 400 to 2000 RPM (120mm)
- Clean cable management with Daisy-Chain cables to connect multiple fans together with a single PWM extension cable
- Excellent low noise performance thanks to a high airflow/RPM ratio to minimize bearing and motor noises
- High cooling capacity at 2000 (120mm) RPM to cool even the most powerful hardware components
- Connect directly to an A/D-RGB equipped motherboard with included Motherboard adapter
High airflow fans
The Phanteks M25 fan builds upon the award winning T30 fan to keep next gen hardware cool with high airflow cooling performance.
The M25 fan blades are specifically optimized to perform the best with fine mesh/dust filters, heatsinks and radiators with reduced RPM levels. This optimization keeps unwanted bearing noises at a minimum while also leaving plenty of cooling headroom when necessary by going full speed.
By sharing some of its design with the T30, the M25 stands out by delivering higher airflow through heatsinks and radiators with lower RPM levels with exceptional value. The wide RPM range, up to 2000 (120mm) RPM, can be precisely controlled through PWM to ensure the M25 is excellent for both quiet and high-end gaming systems.
Specifications
| Fan Dimension (WxHxD) |
120 x 120 x 25 mm / 4.72 x 4.72 x 0.98 in |
| Weight |
155g |
| Input Signal |
PWM |
| Materials |
PBT frame, PC blades, rubber dampeners |
| Bearing Type |
Hydraulic Bearing |
| Blade |
Nine Blades Design |
| Fan Connector |
4-Pin Daisy-Chain |
| Rated Voltage |
DC 12V |
| Operating Voltage Range |
DC 7 - 13.2V |
| Rated Current (Ampere) |
0.19A |
| Locked Current |
Polarity Protection |
| Max Power (W) |
2.4W |
| Speed (RPM) |
400-2000 ±10% RPM |
| Airflow (CFM) |
84.26 CFM |
| Fan Static Pressure |
2.67 mm H2O |
| Sound Level (dBA) |
35.7 dBA |
| Cable Length |
15+120mm |
| D-RGB Connector |
3 Pin D-RGB Daisy-Chain |
| D-RGB Cable length |
300+100 mm |
| LED Number |
12 (D-RGB) |
| LED Rated Voltage |
DC 5V (+5V/GND) |
| LED Rated Current |
Max 0.25 ± 0.04A |
| MTTF |
30.000 hours at 50oC |
| Package Contents |
3x M25-120 fan
2x 500mm 4-Pin Extension Cable
12x Fan Screw
1x 600mm D-RGB Motherboard connection cable |
| Warranty |
5 years |
Backed by a 5 year Phanteks warranty.
