On sale! (normally $89) The Ryzen 7000 Delid-Die-Mate is a tool to safely delid Ryzen 7000 CPUs. To install a CPI cooler directly on the cooler die, this Delid-Die-Mate assist with this process resulting in much cooler temperatures for your CPU.
Features
Overview
Ryzen 7000 Delid-Die-Mate
The Ryzen 7000 Delid-Die-Mate is a tool for removing the heatspreader on AMD Ryzen 7000 processors. By removing the heat spreader, the CPUs can be cooled via "Direct Die", for example. With the so-called "direct die", the CPU cooler is mounted directly on the CPU dies and the I/O die of the processor. By omitting the heat spreader in the cooling circuit, a significantly optimized heat transfer from the dies to the CPU cooler is possible.
Properties
- Compatible with Ryzen 7000 CPUs
- Delidding tool
- Made from aluminum
Delidding on Ryzen 7000 Processors
Ryzen 7000 CPUs are primarily delidded for a possible installation of the CPU cooler directly on the CPU die. In the case of Ryzen 7000 CPUs, this would be the I/O die (IOD) and one or two CPU dies (CCDs) (chiplets). By leaving out the heatspreader and mounting the CPU cooler directly on the die, the temperatures can be reduced by 10-20°C.
Ryzen 7000 Heat Spreaders
These enormous temperature improvements through Direct Die are also due to the heat spreader of the Ryzen 7000 processors. The heat spreaders for the AM5 platform introduced with Ryzen 7000 are thicker than older heat spreaders such as AM4. This was done to make older AM4 compatible CPU coolers compatible with the AM5 platform as well. In addition, the surface of the Ryzen 7000 heat spreader is significantly smaller at around 910 mm² compared to AM4 at 1,300 mm².
Specifications
| Model |
TG-DDM-R7000-R |
| Product Name |
Thermal Grizzly Ryzen 7000 Delid-Die-Mate |
| Length |
74 mm |
| Width |
70,1 mm |
| Height |
19,8 mm |
| Material |
Anodised aluminium |
| Colour |
Black
Red |
Backed by a 1-year Thermal Grizzly warranty.
